High corset LITERCROSS 93

PUTTING ON THE APPLIANCE REF. 1090/1091/1093
1 Open the orthosis and temporarily fasten the Velcro® straps on the side (fig. A).
2 Put the orthosis in place with the loop on the upper side.
3 Insert your thumb in the loop and fasten well the central Velcro® closure (fig. B). Make sure the closure is centered.
4 Tighten the orthosis by fastening the straps on the front Velcro® band (fig. C).
NOTE: to ensure optimal stabilisation, mould the rigid stays provided and slide them into the pockets provided in the back.
Attaching the rigid pad:
– if necessary, heat and mould the plastic part to fit the shape of the patient’s body.
– place the padding on the plastic part (concave side-without any writing-fig.L)
– apply the adhesive Velcro® fasteners centrally on the opposite side to the padding (fig.M)
– attach the pad to the central Velcro® to the inside of the back of the o

MAINTENANCE
Do not bleach No chemical cleaning
Do not iron Do not tumble-dry
Washing instructions:
ORTHOSIS
• ensure that the Velcro® fasteners are securely closed before washing the orthosis
• wash the orthosis separately
• wash by hand or in the washing machine with mild detergent using an ultra-gentle cycle at a maximum of 30°C
• leave to dry away from direct heat
PAD
• Handwash with mild detergent at a maximum of 30°C (we recommend using a sponge)
• leave to dry away from direct heat
Dispose of this product and its parts responsibly