Knee orthosis.
Open knee supports are fastened by overlapping and attaching the two flaps so that they do not need to be pulled on over the foot.
Even easier to put on and more comfortable to wear, even for long periods of time. Even more breathable, stronger, and softer thanks to the special flocking on the BreathSkill fabric.
Because the healing process is easier when you feel good and comfortable.
INDICATIONS
Size | XS | S | M | L | XL | XXL |
Thigh circ. taken 15 cm above mid-patella cm | 33/39 | 39/45 | 45/52 | 52/58 | 58/66 | 66/75 |
Length cm | 34 | 34 | 34 | 34 | 34 | 34 |
fits right and left
€75.80
Knee orthosis with hinges
CHARACTERISTICS AND MATERIALS
• Structure made of BreathSkill:
– soft and breathable
– 3D weave
– high resistant mesh
• GenuSKILL 08/15 only: FlexSkill front support (bi-layer technical fabric) with special low-profile anti-irritation welding
seam
• GenuSKILL 08A/15A only: New Velcro® fastening system for easier fastening
• GenuSKILL 08/15 only: Patella stabilizer
• CompresSkill support:
– Stretchy multi-fibre and compression material
– Ultra-low-profile anti-irritation for better comfort (knee flexion)
– Fully adaptable
– Perfect adherence
• GenuSKILL 08/08A only: Medial and lateral stays to keep brace correctly positioned.
• GenuSKILL 15/15A only: Pair of polycentric hinges for mid-lateral stabilization (flexion limit to 60° or 90°).
• Upper and lower stabilizing straps:
– Symmetrical fastening system to avoid brace rotation when fastening
– Articulated central buckle for “automatic” adaptation to leg
– Rubber tab for easy Velcro® fastening
ADAPTING FOR THE DOCTOR/TECHNICIAN
1 Undo all the Velcro® fastenings and fasten them back on themselves for the time being.
2 GenuSKILL08 · GenuSKILL15
Slide the tubular support onto the knee with the orange label towards the top (fig. A), the kneecap positioned exactly in
the middle of the opening, (fig. B) and the stays parallel to each other.
GenuSKILL08A · GenuSKILL15A
Wrap the support around the knee with the orange label facing upwards, taking care to align the opening with the
kneecap; fasten the Velcro® straps above and below the knee (fig. C and D).
3 GenuSKILL15 · GenuSKILL15A
If necessary, remove the knee support, remove the stays from their pockets and adapt them to fit the shape of the leg
(fig. E). Next slide the stays back into their pockets and don the knee support once again.
4 Pass the two ends of the upper strap through the ring provided, pull symmetrically with both hands, and fasten with the
Velcro® (fig. F). Repeat this procedure with the lower strap (fig. G).
PUTTING ON THE APPLIANCE FOR THE PATIENT
1 Undo all the Velcro® fastenings and fasten them back on themselves for the time being.
2 GenuSKILL08 · GenuSKILL15
Slide the tubular support onto the knee with the orange label towards the top (fig. A), the kneecap positioned exactly in
the middle of the opening, (fig. B) and the stays parallel to each other.
GenuSKILL08A · GenuSKILL15A
Wrap the support around the knee with the orange label facing up, taking care to align the opening with the kneecap;
fasten the Velcro® straps above and below the knee (fig. C and D).
3 Pass the two ends of the upper strap through the ring provided, pull symmetrically with both hands, and fasten with the
Velcro® (fig. F). Repeat this procedure with the lower strap (fig. G).
MAINTENANCE
Do not bleach, No chemical cleaning, Do not iron, Do not tumble-dry.
Washing instructions: hand wash at max. 30° C with neutral soap, (REF. 33115 · 33115A only: after removing the
hinged bars), do not dry in the vicinity of heat sources.
Do not dispose of the product or any of its components into the environment.