Cushioning insole with transverse reinforcement Pedivis Active

PUTTING ON THE APPLIANCE
FIRST APPLICATION
1. Remove the original insole from the patient’s shoe.
2. Place the insole in the shoe, check that it is correctly positioned, and ask the patient to try it on.
3. Alterations may be made to the insole to suit individual requirements. If you wish to reshape the insoles, first preheat them in an oven at 90° for thirty seconds before heating with a heat gun from a distance of 20 – 25 cm ONLY on the side with the top covering (never heat the underside with the clear film); the insoles are now ready to be reshaped.
4. We recommend removing the insole from the shoe after wear so that it can air.
SUBSEQUENT WEAR
1. Place the insole in the shoe and check that it is correctly positioned.
2. We recommend removing the insole from the shoe after wear so that it can dry.
CONTRAINDICATIONS
Currently no known

MAINTENANCE
Washing instructions:
Wash by hand up to 30°C with neutral soap; let it dry away from heat sources. Do not dispose of the product or any of its components into the environment. componente.